trezor.io
Rate this file (Rating : 5 / 5 with 1 votes)
young brunette girl with a hat and a long necklace outside in the nature posing on logged tree trunks
trezor.io

Young Brunette Girl With A Hat And A Long Necklace Outside In The Nature Posing On Logged Tree Trunks

Cut-to-length logging is the process of felling, delimbing, bucking and sorting (pulpwood, sawlog, etc.) at the stump area, leaving limbs and tops in the forest. Harvesters fell the tree, delimb and buck it, and place the resulting logs in bunks to be brought to the landing by a skidder or forwarder. This method is routinely available for trees up to 900 mm in diameter. Harvesters are employed effectively in level to moderately steep terrain. Harvesters are highly computerized to optimize cutting length, control harvest area by GPS and utilize price list for each specific logs to archive most economical results during harvesting.
• Transporting logs
Felled logs are then generally transported to a sawmill to be cut into timber, a paper mill for paper pulp, or for other purposes, like fence posts. Many methods have been used to move logs from where they were cut to a rail line or directly to a sawmill or paper mill. The cheapest and historically most common method is making use of a river's current to float floating tree trunks downstream, by either log driving or timber rafting. (Some logs sink because of high resin content; these are called deadheads.) To help herd the logs to the mill, in 1960 the Alaskan Lumber and Pulp Mill had a specially designed boat that was constructed of 1 1/2 inch steel. In the late 1800s and the first half of the 1900s, the most common method was the high-wheel loader, which was a set of wheels over ten feet tall that the log or logs were strapped beneath. Oxen were at first used with the high-wheel loaders, but in the 1930s tractors replaced the oxen. In 1960 the largest high wheel loader was built for service in California. Called the Bunyan Buggie, the unit was self-propelled and had wheels 24 feet high and a front dozer blade that was 30 feet across and 6 feet high. Log transportation can be challenging and costly since trees are often far from roads or watercourses. Road building and maintenance may be restricted in National Forests or other wilderness areas since it can cause erosion in riparian zones. When felled logs sit adjacent to a road, heavy machinery may simply lift logs onto trucks. Most often, special heavy equipment is used to gather the logs from the site and move them close to the road to be lifted on trucks. Many methods exist to transport felled logs lying away from roads. Cable logging involves a yarder, which pulls one or several logs along the ground to a platform where a truck is waiting. When the terrain is too uneven to pull logs on the ground, a skyline can lift logs off the ground vertically, similar to a ski lift. Heli-logging, which uses heavy-lift helicopters to remove cut trees from forests by lifting them on cables attached to a helicopter, may be used when cable logging is not allowed for environmental reasons or when roads are lacking. It reduces the level of infrastructure required to log in a specific location, reducing the environmental impact of logging. Less mainstream or now for the most part superseded forms of log transport include horses, oxen, or balloon logging.

File information
Filename:547890.jpg
Album name:Babes
Rating (1 votes):55555
Keywords:#young #brunette #girl #hat #long #necklace #outside #nature #posing #logged #tree #trunks
Filesize:181 KiB
Date added:Apr 04, 2013
Dimensions:850 x 1228 pixels
Displayed:240 times
URL:displayimage.php?pid=547890
Favorites:Add to Favorites